With the rough plumbing complete and the toilet chair carrier in position, finish the electrical and add blocks as needed to support the sink (Photo 15), towel bars, grab bars, etc. Then close up the walls. We recommend cement board for durable tile walls and floors, but other tile backers are available at tile shops. Here are key installation tips:

Pedestal sinks can saver or waste space depending on the arrangement and storage options of your bathroom. If you want to open up floor space, they’re an excellent choice. However, they don’t offer the storage that vanity cabinets provide. If your bathroom lacks storage but you have your heart set on a pedestal sink, include open shelves or a tile-lined niche behind or adjacent to it. Alternatively, consider using cabinetry 16 or 18 inches deep, instead of the usual 21 inches, to maximize your floor plan.
Don't settle for a wimpy flusher. Maximum Performance testing (MaP) gauges a toilet's ability to get the job done with just one push of the handle. Look for a loo with a MaP score of 500 or higher; this group includes many WaterSense-rated toilets, high-efficiency models that use as little as half of the 1.6-gallon-per-flush legal limit. Go to map-testing.com for more info.

The special-order fixtures, fittings, shower pan, tile and glass block panel can take weeks to get in hand, so do the necessary legwork and ordering well in advance. Before gutting the bathroom, check to make sure that there are shutoffs for all the fixtures or a master shutoff for the entire bathroom. If not, buy ball valve shutoffs sized to fit your pipes. Then turn off the main water supply line where it comes into the house from outside, cut the pipes feeding the bathroom and install the new shutoffs right away (see Photo 7).


Although this new bathroom is a bit smaller because of additional plumbing walls, it appears larger. Substituting a shower for the bathtub, adding a large mirror, and using a wall-hung sink and toilet all contribute to the spacious feeling. This big-picture stuff is striking, but it’s the step-by-step details that make this small bathroom remodel work. We cover the little kernels of information that will help your project go more smoothly and with fewer headaches.

Renovating a bathroom is no small undertaking. So before you start tearing up the tiles and picking out the tub, get a little advice from the people who make bathroom makeovers their bread and butter. We polled contractors, designers, and other pros for their top tips and insider tricks for getting every detail right. Follow these DIY bathroom remodeling tips and you're sure to create the bathroom you always wanted.
The parts of the country with the worst ROI, ranging between 58.8 percent and 59.2 percent, are the East North Central region (Wisconsin, Illinois, Indiana, Michigan and Ohio), the West North Central region (North Dakota, Minnesota, South Dakota, Nebraska, Iowa, Kansas and Missouri) and the Middle Atlantic region (Pennsylvania, New Jersey and New York).
The parts of the country with the worst ROI, ranging between 58.8 percent and 59.2 percent, are the East North Central region (Wisconsin, Illinois, Indiana, Michigan and Ohio), the West North Central region (North Dakota, Minnesota, South Dakota, Nebraska, Iowa, Kansas and Missouri) and the Middle Atlantic region (Pennsylvania, New Jersey and New York).
For your remodeled bathroom to operate well, it’s critical to install vent and drain lines of the proper size and slope. Use a 2-in. line to drain the shower and 1-1/2-in. line to drain the sink. The vents for the sink and shower can be 1-1/2-in. pipes, but a toilet should be vented with at least 2-in. material. Make sure that the drain lines drop 1/4 in. for every foot of travel toward the main stack.

Choose the main color theme for your bathroom, but it should depend on the existing color of the wall. For example, for white colors, apply the white color on all over the walls and furniture. But to keep the contrast, apply a bit darker color for your flooring. You can do it by having a cheaper tile stamp to get the floral or another exciting pattern.

Another thing to do is to add a few matching accessories such as towel bars and toilet paper holder and change the fixtures to unify the look of the bathroom’s hardware. Sets of bathroom fixtures may available on home improvement stores that you can purchase at fairly affordable cost. What a perfect unity style of the bathroom remodels ideas you should try!
Nail the bottom plate to the floor and the top plate to the ceiling. Then mark the positions of the shower base, toilet and sink. Lay out and toenail the wall studs into position (Fig. B) and the top plate for the low wall. On the opposite end of the shower, frame a matching 35-in. wide wall (see Photo 14) 60-1/4 in. (or the length of your shower base plus 1/4 in.) away from the first wall.
To begin, rip the top and side jambs to the thickness of the wall framing plus the exterior wall sheathing. The cement board will lap over the jambs. The windowsill should also be flush with the interior framing, but hang over the outside sheathing about 1-1/2 in. and have a 5-degree slope toward the outside to help shed water. To keep water from running behind the siding as it drips off the edge, cut a shallow groove (or saw kerf) in the bottom lip (Fig. A). Also, remember to flash behind the trim to keep the window watertight. Trim the window exterior to match the house, using caulk to seal between the trim and siding.
Wall and Floor Tile: Ceramic, porcelain and natural stone are popular picks for floor tile in bathrooms. Materials will be the deciding factor here, but natural stone often costs more to install because it is difficult to cut and place. From natural stone and classic ceramic to glass and mosaic styles that mimic natural materials, wall tile options vary.
However, if your bathroom has cracked tile, mold, water damage, structural issues or substandard electrical, you’ll definitely want to remodel, as most of those issues will come up in a buyer’s inspection anyway. When selling a home with serious issues, you’re going to end up paying for the repairs one way or another — by doing the repairs before listing, negotiating with your buyer after a poor inspection report, or by listing at a lower price in consideration of the work that needs to be done.

The parts of the country with the worst ROI, ranging between 58.8 percent and 59.2 percent, are the East North Central region (Wisconsin, Illinois, Indiana, Michigan and Ohio), the West North Central region (North Dakota, Minnesota, South Dakota, Nebraska, Iowa, Kansas and Missouri) and the Middle Atlantic region (Pennsylvania, New Jersey and New York).
A DIY bathroom remodel is a big project. If you can only work weekends, your bathroom will be out of commission for two months or more. You’ll need all your expertise as an experienced do-it-yourselfer because you’ll have to tackle electrical, plumbing, tiling, drywalling, taping and even exterior siding. In this DIY shower remodel article, we’ll deal mostly with the nuts and bolts of ripping out existing plumbing and replacing it correctly with new, easily installed PVC piping.
×